# Cutwater 1947 Chris Craft U-18 **URL:** \ **Category:** PARTS\ **Created:** [May 4, 2024, 1:24am UTC](https://forum.oldboatshome.com/t/cutwater-1947-chris-craft-u-18/385 "2024-05-04T01:24:48Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![jshendrix01](https://avatars.discourse-cdn.com/v4/letter/j/59ef9b/32.png) [@jshendrix01](https://forum.oldboatshome.com/u/jshendrix01)\ **Post date:** [May 4, 2024, 1:24am UTC](https://forum.oldboatshome.com/t/cutwater-1947-chris-craft-u-18/385/1 "2024-05-04T01:24:49Z")
Does anyone have a good source for the fabrication of a cutwater for a 1947 Chris Craft U-18 or have one that will fit? I don’t even have an old one for a pattern but I’m sure I can create a template. Most of the metal fabrication shops I’ve talked to can’t do the curved section at the upper end. For ones that could do that the metal is too thick to roll the curve. The “V” shaped part is no problem. ---
**Author:** ![Dbonacker](https://avatars.discourse-cdn.com/v4/letter/d/49beb7/32.png) [@Dbonacker](https://forum.oldboatshome.com/u/Dbonacker)\ **Post date:** [May 4, 2024, 12:35pm UTC](https://forum.oldboatshome.com/t/cutwater-1947-chris-craft-u-18/385/2 "2024-05-04T12:35:20Z")
I know of someone in Mo. He did a beautiful job on a 1926 Dart last year. ---
**Author:** ![Mguill](https://avatars.discourse-cdn.com/v4/letter/m/ba8739/32.png) [@Mguill](https://forum.oldboatshome.com/u/Mguill)\ **Post date:** [May 4, 2024, 1:09pm UTC](https://forum.oldboatshome.com/t/cutwater-1947-chris-craft-u-18/385/3 "2024-05-04T13:09:08Z")
Buffalo Metal Works - Sagle, ID - made one for my 1935 Dodge several years ago. [Buffalometalworks@gmail.com](mailto:Buffalometalworks@gmail.com) 208-265-1945 ---
**Author:** ![Tuobanur](https://avatars.discourse-cdn.com/v4/letter/t/ecc23a/32.png) [@Tuobanur](https://forum.oldboatshome.com/u/Tuobanur)\ **Post date:** [May 6, 2024, 3:25pm UTC](https://forum.oldboatshome.com/t/cutwater-1947-chris-craft-u-18/385/4 "2024-05-06T15:25:52Z")
Mike Schreiber, 508-333-9336. He did mind and did a great job. ---
**Author:** ![jshendrix01](https://avatars.discourse-cdn.com/v4/letter/j/59ef9b/32.png) [@jshendrix01](https://forum.oldboatshome.com/u/jshendrix01)\ **Post date:** [May 6, 2024, 5:13pm UTC](https://forum.oldboatshome.com/t/cutwater-1947-chris-craft-u-18/385/5 "2024-05-06T17:13:45Z")
Unfortunately, Mike doesn’t do U-22 or U-18 cutwaters any more according to their website. ---
**Author:** ![ArtArmstrong](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.oldboatshome.com/artarmstrong/32/105_2.png) [@ArtArmstrong](https://forum.oldboatshome.com/u/ArtArmstrong)\ **Post date:** [May 11, 2024, 3:24am UTC](https://forum.oldboatshome.com/t/cutwater-1947-chris-craft-u-18/385/6 "2024-05-11T03:24:25Z")
What part of he country are you in? We have a guy here in Michigan that is a fantastic metal guru and could do it. ---
**Author:** ![jshendrix01](https://avatars.discourse-cdn.com/v4/letter/j/59ef9b/32.png) [@jshendrix01](https://forum.oldboatshome.com/u/jshendrix01)\ **Post date:** [May 11, 2024, 1:01pm UTC](https://forum.oldboatshome.com/t/cutwater-1947-chris-craft-u-18/385/7 "2024-05-11T13:01:09Z")
I live in the Southwestern part of Idaho (Boise/Nampa area) ---
**Author:** ![ArtArmstrong](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.oldboatshome.com/artarmstrong/32/105_2.png) [@ArtArmstrong](https://forum.oldboatshome.com/u/ArtArmstrong)\ **Post date:** [May 13, 2024, 3:27am UTC](https://forum.oldboatshome.com/t/cutwater-1947-chris-craft-u-18/385/8 "2024-05-13T03:27:26Z")
Jeff I don’t know how desperate you are, but here is our metal grgu here in Michigan. His name is Jim Mathis and # is 810 794 7231. Tell him that Frankie and Art sugggested him. ---
**Author:** ![jshendrix01](https://avatars.discourse-cdn.com/v4/letter/j/59ef9b/32.png) [@jshendrix01](https://forum.oldboatshome.com/u/jshendrix01)\ **Post date:** [May 13, 2024, 2:28pm UTC](https://forum.oldboatshome.com/t/cutwater-1947-chris-craft-u-18/385/9 "2024-05-13T14:28:13Z")
Thanks for the information. I’m just starting the restoration project and doing an inventory of missing parts. On my latest project I waited until I needed the parts to start looking. Needless to say there has been a lot time waiting. Thanks again. I’ll get in touch with Jim. ---
**Author:** ![ArtArmstrong](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.oldboatshome.com/artarmstrong/32/105_2.png) [@ArtArmstrong](https://forum.oldboatshome.com/u/ArtArmstrong)\ **Post date:** [May 13, 2024, 3:06pm UTC](https://forum.oldboatshome.com/t/cutwater-1947-chris-craft-u-18/385/10 "2024-05-13T15:06:48Z")
Wow Jeff I got the impression that you were in need of a cut water now, not just looking. Jim is a very busy and particular about who he does work for so I would suggest that you don’t call him unless you actually need one. ---
**Author:** ![jshendrix01](https://avatars.discourse-cdn.com/v4/letter/j/59ef9b/32.png) [@jshendrix01](https://forum.oldboatshome.com/u/jshendrix01)\ **Post date:** [May 13, 2024, 5:12pm UTC](https://forum.oldboatshome.com/t/cutwater-1947-chris-craft-u-18/385/11 "2024-05-13T17:12:03Z")
Thanks for the information. I have yet been able to get a hold of Jim. His busy schedule is exactly why I’m looking now for a fabricator. I don’t want wait until I’m ready to install the cutwater and then start looking. I need one but not at this moment. I can get on his schedule and have it when I need it. There is a local shop I use for various stainless steel parts but they can’t do the curved part on a 47 U-18 cutwater. If it was a normal “V” shape I could get locally. ---
**Author:** ![gus](https://avatars.discourse-cdn.com/v4/letter/g/ecc23a/32.png) [@gus](https://forum.oldboatshome.com/u/gus)\ **Post date:** [September 15, 2024, 1:40pm UTC](https://forum.oldboatshome.com/t/cutwater-1947-chris-craft-u-18/385/12 "2024-09-15T13:40:57Z")
I have a cut-water for sale. It is from a 1947 Chris Craft - Sportsman. Contact me at [JIMJDTA@GMAIL.COM](mailto:JIMJDTA@GMAIL.COM) ---
**Author:** ![jshendrix01](https://avatars.discourse-cdn.com/v4/letter/j/59ef9b/32.png) [@jshendrix01](https://forum.oldboatshome.com/u/jshendrix01)\ **Post date:** [September 16, 2024, 10:46pm UTC](https://forum.oldboatshome.com/t/cutwater-1947-chris-craft-u-18/385/13 "2024-09-16T22:46:53Z")
Jim, Thanks for thinking of me but I recently commissioned someone to make one for me. I don’t know how far along they are but I know they have started. Thanks anyway.